Back to Blog

How to Install an eSIM: QR Code, LPA Code and Manual Setup Guide

How to Install an eSIM: QR Code, LPA Code and Manual Setup Guide
Important: This eSIM is an internet (data) package only.

It does not include a phone number and cannot receive SMS or verification codes (WhatsApp, Telegram, bank codes, etc.). To receive a verification code, use our SMS Verification service.

Go to SMS Verification

An eSIM is a digital SIM that lets you add a mobile plan without inserting a physical SIM card. You can install your eSIM in 3 ways. The QR code method is the easiest.

Before you start

  • Make sure your phone supports eSIM (iPhone XS or newer, Google Pixel 3 or newer, Samsung Galaxy S20 or newer, etc.) and is not carrier-locked.
  • You need an internet connection (Wi‑Fi) during installation.
  • Install the eSIM only once; do not delete and re-install it.
  • You can install it before you travel while on Wi‑Fi, and turn on data once you land.

Method 1: Install with a QR code (recommended)

Open the QR code on another screen (computer or second device) and scan it with your phone.

iPhone

  1. Go to Settings → Cellular (or Mobile Data) → Add eSIM.
  2. Tap Use QR Code and scan the QR code from your panel.
  3. Follow Continue and Activate eSIM, and give it a label (e.g. "Travel").

Android (Samsung, Pixel, Xiaomi, etc.)

  1. Go to Settings → Connections (or Network & internet) → SIM manager → Add eSIM (Samsung: SIM card manager → Add eSIM).
  2. Choose Scan QR code and scan the code.
  3. Confirm the on-screen steps.

Method 2: Direct LPA code (automatic install)

The LPA code is the text version of the QR code, in the form LPA:1$server-address$activation-code. Use it if you cannot scan the QR code (for example, when viewing it on the same phone).

  1. Tap Copy next to Direct LPA Code in your panel.
  2. On iPhone: Add eSIM → Use QR Code → Enter Details Manually. On Android: Add eSIM → Enter code manually.
  3. Paste the code and continue.

Method 3: Manual setup (SM-DP+ address and activation code)

  • SM-DP+ Address: the operator server the eSIM profile is downloaded from (e.g. rsp-eu.simlessly.com).
  • Activation Code (Matching ID): a secret code unique to your profile.
  1. Open the manual entry screen (Enter Details Manually on iPhone, Enter code manually on Android).
  2. Enter the SM-DP+ address and Activation code copied from the panel. Leave the confirmation code empty if asked.
  3. Finish the installation.

After installation: turn on data

  1. When you arrive at your destination, turn the eSIM line on.
  2. Select this eSIM for mobile data, and turn off mobile data / roaming for your main line to avoid roaming charges.
  3. Keep Data Roaming turned on for the eSIM line; it is required for the eSIM to work.

Troubleshooting

  • "Cannot activate eSIM / invalid code": make sure you are on Wi‑Fi, wait a few minutes and retry. A code that was already installed cannot be installed again.
  • No internet: check that the eSIM line is on, selected for mobile data, and Data Roaming is enabled; restart your phone.
  • I deleted the eSIM by mistake: a deleted eSIM cannot be re-installed; please contact support.

Still stuck? Open a support ticket from your panel and we will help.